AA104MI/D
Military Standard Manual Inhibit Push Button
FIRE SUPPRESSION products
- Real time smoke info
- Remote smoke sensitivity alteration from the panel
- Detailed location description settings
- Address can be changed from the panel
- Soft addressing
- Pre alarm
- Contamination alarm
- Extreme environmental protection
- Transient voltage protection upto 2.4KV
- Remote test facility from the panel
- Electrical supervision
- Dual bi-color LED indication for 360° viewing angle
- Corrosion protection
- Insect-resistant screening
- Easy to maintain/service
General Specifications
Operating temperature : -10ºC to 55ºC
Humidity : 0-95% RH (Non-condensing)
Color : Red
Compatibility : AUAA2X Protocol
Mechanical Specifications
Dimensions(HxW) : 130x130x50mm
What is a smoke detector and how does it work?
Smoke detector is a measuring instrument that measures the level of smoke in its surveillance. It will raise an alarm only when the level of smoke exceeds its pre-set upper limit/threshold values.
Photoelectric/Optical Smoke detector work on a common light scattering principle. Smoke detector contains a chamber that consists of a light emitter usually a LED and a light a sensitive device like a photodiode that receives all the light directly emitted by the LED.
When the smoke enters the chamber, the intensity of light received by the photodiode reduces due to density of smoke. If the intensity of received light drops below a pre-set threshold level, fire alarm is triggered confirming fire.
Unit of measure for level of smoke is Obscuration/foot (Obs/ft).
Photoelectric smoke detectors are highly sensitive to visual particles of smoke and also respond quickly to smouldering fires.
Addressable smoke detectors are wired using 2*1.5 sqmm copper cables from control panel.
