manual call point fire & pa

• Soft addressing
• Electrical supervision
• Transient voltage protection up to 2.4KV
• No manual reset is required
• Address can be changed from panel
• Flip cover to avoid accidental activation
• Blinking LED for visual supervision
• Remote test facility from the panel
• Attention seeking product design for easy identification

What is a Manual Call Point? 

Manual Call Points (MCP) are devices that are used to manually trigger the fire alarm system. It is to be used only after the confirmation of the existence of fire in the building. They can also be used at the time of other potential threats such as terrorism, earthquakes, etc. to alert the occupants for immediate evacuation. 

Where & how should Manual Call Points be installed?

MCPs should be installed at exit-prone areas of the building that include staircases, escape routes, against main doors and corridors.

They should be positioned such that no person travels beyond 12 meters to activate the nearest call point. Or, there should be a maximum gap of 24 meters between the two nearest call points.

They should also be mounted at a height of about 1.5 meters from the floor to ease actuation.  

What are the variants of Manual Call Points?

• Push Button type:  Actuated by pushing the button. These are mostly used indoors of office space, residences, etc., and often come with a protective flip cover to avoid malicious activation.
• Break Glass type: They are triggered by breaking the glass and pushing the inside button, or by just breaking the glass. These can be used indoors at industries, residences, etc.
• Explosion Proof type: Mostly found suitable for outdoors or industrial purposes. It is actuated by breaking the glass.
• Weatherproof type:  Again a suitable variant for outdoors and industrial applications. They are triggered by breaking the glass.