- Soft addressing
- Contamination alarm
- Real time smoke info
- Remote test facility from the panel
- Remote sensitivity alteration from the pane
- Electrical supervision
- Insect-resistant screening
- Address can be changed from the pane
- Easy to maintain/service
- Dual bi-color LED indication for 360° viewing angle
- Transient voltage protection upto 2.4KV
- Corrosion protection
Operating voltage : 17-27V DC
Quiescent current : 200uA
Alarm current : 1mA
Normal : Green LED(Blinks during scan)
Alarm : Red LED(Glows steady)
What is a smoke detector and how does it work?
Smoke detector is a measuring instrument that measures the level of smoke in its surveillance. It will raise an alarm only when the level of smoke exceeds its pre-set upper limit/threshold values.
Photoelectric/Optical Smoke detector work on a common light scattering principle. Smoke detector contains a chamber that consists of a light emitter usually a LED and a light a sensitive device like a photodiode that receives all the light directly emitted by the LED.
When the smoke enters the chamber, the intensity of light received by the photodiode reduces due to density of smoke. If the intensity of received light drops below a pre-set threshold level, fire alarm is triggered confirming fire.
Unit of measure for level of smoke is Obscuration/foot (Obs/ft).
Photoelectric smoke detectors are highly sensitive to visual particles of smoke and also respond quickly to smouldering fires.
Addressable smoke detectors are wired using 2*1.5 sqmm copper cables from control panel.
others in series
Multisensor With Sounder
Analog LHS Cable
Digital LHS Cable